FUTURE-PROOFING YOUR BUILDING
Coatings for
Mineral surfaces
Découvrez notre gamme de finitions protectrices et décoratives
Voor bijna alle minerale ondergronden hebben wij een ruim assortiment aan decoratieve peisters, beschermende afwerkingen en cleaners. Indien u, voor uw ondergronden, uit ons gamma geen product vindt voor uw toepassing, kunt u ons steeds contacteren.
Decorative plasters, primers, floor sealers, hydrophobise , and cleaners
DECORATIVE PLASTERS
These Decorative Plasters (fine toppings) are innovative, creative and decorative plasters in for professional interior decoration for finishing walls, ceilings and floors. Ready-to-use, water-based, very easy to apply and available in various colours.
Preparing
Very fine dispersion for deep waterproofing and reinforcement of highly absorbent substrates.
Klaar voor gebruik, zeer goede en gemakkelijke toepassing, sneldrogend, waterdicht, verdunbaar met water (max. 3x), VOC-vrij, voor binnengebruik
- # layers: 1
- Consumption: approx. 10 m²/kg with roller or brush.
- Drying time: 1 hour at 20 °C and 65% relative humidity.
- Packaging: 5 kg
- Color: none, transparent film
Light leveling plaster for preparing walls and floor surfaces before applying Robusta and Calce.
Ready for use, low shrinkage, very good and easy application, water-based, open to water vapor but waterproof, VOC-free, homogeneous surface structure depending on the application, also usable as a final coat, easy to sand, for indoor use.
- # layers: 1
- Consumption: 2-3 m²/kg, with a spatula, maximum 5 mm per layer.
- Drying time: approx. 4 hours at 20 °C and 65% relative humidity.
- Packaging: 12 kg
- Color: light gray
PRIME
Fast-drying granular primer for non- or low-absorbent surfaces.
Ready for use, easy to apply, quick-drying, waterproof, water-based, VOC-free, for indoor use.
- # layers: 1
- Usage: 6-8 m²/kg, with roller, brush, paintbrush, airless spray.
- Usage: 6-8 m²/kg, with roller, brush, paintbrush, airless spray.
- Packaging: 5 and 12 kg
- Colors: standard light gray, available in other colors upon request.
APPLYING
On calcareous marble base. Decorative and ready-to-use plaster for the finishing of walls and ceilings. Available in 3 grain sizes: Fine (F), Medium (M), and Coarse (C): 0.3 - 0.5 and 0.7 mm.
Fine (F), Medium (M), en Coarse (C): 0,3 – 0,5 en 0,7 mm
One-pot system, very easy to apply, water-based, seamless, open to water vapor, moisture-regulating indoor climate, long open time, VOC-free, homogeneous to structured surface structure, easy to sand, for indoor use.
Use MT PROTECT GLOSS for a longer open time between layers.
- # layers: 1-2
- Usage: 1.6 - 1.8 m²/kg/layer, with flat trowels
- Drying time: 6 - 8 hours per layer at 20 °C and 65% relative humidity.
- Packaging: 15 kg
- Colours: see MT Colour chart.
- INSTRUCTION VIDEOS SYSTEMS
- CONCRETE
- GATOR
- GRAIN
- GRAIN COARSE
- HORIZON
Strong decorative and ready-to-use plaster for finishing walls, ceilings and floors. Exists in 2 grain sizes: light (F) or coarse (C) textured. (0.3mm - 0.7mm).
One-pot system, very easy to apply, waterborne, seamless, open to water vapour but waterproof, long open time, homogeneous to structured surface texture, easy to sand, for interior use
- # layers: 1-2
- Consumption: 1.6 - 2 m²/kg/layer, with a flat trowel.
- Drying time: 2 - 4 hours per coat at 20 °C and 65% relative humidity.
- Packaging: 15 kg
- Colours: see MT Colour chart.
Exceptionally strong and water-resistant decorative plaster for finishing floors, walls and ceilings. Is also suitable for wet areas. Bestaat in 2 korrelgroottes: Licht (F) of grof (C) gestructureerd. (0.3mm – 0,5mm)
Two-component, very easy to apply, waterborne, seamless, open to water vapour but waterproof. VOC-free, homogeneous to structured surface texture, sandable, for interior use. In combination with MT TOP-SEAL as protective coating, the system is completely VOC-free
- # layers: 2
- Consumption: 2 – 3 m²/kg/layer, with trowel
- Drying time: > 5hrs per layer at 20 °C and 65% relative humidity.
- Open time : 30min, Potlife: to 2.5hrs after mixing
- Packaging: Part A: 6kg, Part B: 0.5kg
- Colours: see MT Colour chart.
PROTECTION
of MT CALCE:
Water-based, colorless and glossy protection with water-repellent properties.
- # layers: 2 for optimal hydrophobicity, wet on wet
- Consumption: 40 - 2000 g/m²
- Drying times: hydrophobic > 5 days.
volledige uitharding: - Packaging: jars of 1 kg
- Colour: transparant film
Water-based, colorless and matte protection with water-repellent properties.
- # layer: 1 with a brush or roller
- Consumption: 50 - 350 g/m²
- Droogtijden: hyrdofoob > 1 week
- Packaging: Jerry cans of 1 kg.
- Kleur: transparante film
van MT ROBUSTA en MT ARMATO:
Water-based, colorless and protective extra matte varnish with high resistance to wear and water.
Hides small scratches and defects, no discoloration, easy to apply, durable, matte finish while maintaining the mineral character, odorless, invisible look with no overlap. For indoor use.
- # layers: 1
- Consumption: 16 m²/L, with roller (Vertical: 1 layer, Horizontal: 2 layers)
- Drying times: hand-dry: 3h, next layer: 5h, full cure: 7 days
- Packaging: Part A: 5kg, Part B: 1kg
- Colour: transparant film
Water-based, colorless and protective extra matte varnish with high resistance to wear and water.
Hides small scratches and defects, no discoloration, easy to apply, durable, matte finish while maintaining the mineral character, odorless, invisible look with no overlap. For indoor use. VOC-free !
- # layers: 1
- Consumption: 16 m²/L, with roller (Vertical: 1 layer, Horizontal: 2 layers)
- Drying times: hand-dry: 3h, next layer: 5h, full cure: 7 days
- Packaging: Part A: 5kg, Part B: 1kg
- Colour: transparant film
Protection of floors
Unique floor protections, water-based or 100%, film-forming or nourishing through impregnation for indoor use.
Easy to apply and available in various colors.
Floor coatings
- Floor Primer AB IMP
- Transparent impregnating primer
- Floor Sealer WB Colour 2C
- Coloured and opaque finishing layer
- Floor Sealer Clear X-Matt 2C
- Transparent, extra matte finishing layer
- HardWax Oil Primer
- Oil-based primer based on natural ingredients
- HardWax Oil
- Hardwax Oil based on natural ingredients
- Satusol Primer
- Oil-based primer based on natural ingredients
- Satusol
- Water-based impregnating agent based on natural ingredients.
- Slim Polybeton System
- Smooth, sanded leveling screed finished with Oil Primer and HardWax oil.
- Full Solid Sealer
- One-coat moisture-curing polymer
HYDROFOBING
- Hydro Shield creme
- For bricks and mineral facades
- Hydro Shield Antidust Outdoor
- Protects vertically against rain and dirt.
CLEANERS
- Cement Cleaner
- Cleaner for cement haze stains
Further information
Indoor & outdoor uses
Carefully review the Technical Data Sheet and discover further possibilities for decoratively protecting mineral substrates.
For entrepreneurs who want to order larger quantities, you can contact us by phone or email. We are happy to create a customized quote for you!
If you have not found what you were looking for among our range of coatings, you can always contact us without obligation.
After you have placed an order, we will contact you to discuss all delivery details with you.
After you have placed an order with us, we will contact you to discuss the further payment details with you.
Mission: Inspiring architects and craftsmen from the industry all over the world to create and renovate future-proof buildings with innovative and sustainable surface technology.
Vision: Taking the lead in inspiring sustainable surface technology for the architectural world and the construction industry.
Legal
- Data protection
- General sales terms and conditions
- Disclaimer
